|
View previous topic :: View next topic
|
| Author |
Message |
LANhead
Joined: 26 Sep 2005
Posts: 3
|
 Posted: Sat Oct 01, 2005 2:15 pm Post subject: Multi Channel
|
 |
|
HELLO THERE!
i would like to know if each port carries 16 midi channels or only one midi channel.If it can carry 16 midi channels how is it configured.I am not able to play more than one channel on my host (logic 7.1).Ive loaded the source(cubase sx 3.1)with kontakt 2.I need to play 16 channels with different sounds on different channels,what is the techniq.....Pls help......
Regards... |
|
| Back to top |
|
|
Inteleky
Joined: 08 Jul 2005
Posts: 20
|
|
Posted: Sun Oct 02, 2005 3:05 pm Post subject: Re: Multi Channel
|
|
|
| LANhead wrote: | HELLO THERE!
i would like to know if each port carries 16 midi channels or only one midi channel.If it can carry 16 midi channels how is it configured.I am not able to play more than one channel on my host (logic 7.1).Ive loaded the source(cubase sx 3.1)with kontakt 2.I need to play 16 channels with different sounds on different channels,what is the techniq.....Pls help......
Regards... |
I don't know if this is what you want to know but:
Each port has 16 channels. In logic you need to go to the environment window by pressing the number 9 on your numeric keypad. In this window , you have to go to New > Multi-Instrumnet. A box with 16 numbers with lines through them and what looks like the icon of a mouse will appear somewhere in the grey area of the environment window.
In this new box, click on each of the sixteen numbers to remove the slashes that are going through them. Double click the little picture of the 'mouse' that is on the top of the new box. In he dialogue that pops up, change the name of the Multi-Instument to 'Kontakt 2 Port 1' or something like that.
To the left side of the envirnment window, you will see to drop down menu's, one for 'Port' and one for 'Channel'. By default both are set to 'All'. Change 'Port' from all, and set it to the port you have connected to Cubase and Kontakt. Leave channel set at 'All'.
Now press #1 on the numeric Keypad to skip to the arrange window. Press Control+Shift+Return to create a new track. On this new track, click and hold down the mouse button and a menu will appear. Find your MOL ports and select the 'Kontakt 2 Port 1 - Channel 1' multi-instrument you created, which will should appear somewhere in the list of this menu.
Once you are done setting up this new track, you need to create the 15 additional tracks for the remaining channels of 'Kontakt 2 Port 1'. You can quickly do this by pressing Control+Shift+Return 15 times to create 15 more tracks.
Now you have all the tracks created in Logic that represent and link to the channels you have in Kontakt 2.
I hope this helps you. If not I can try again..,  |
|
| Back to top |
|
|
LANhead
Joined: 26 Sep 2005
Posts: 3
|
|
Posted: Mon Oct 03, 2005 3:34 am Post subject: MUlti Outs
|
|
|
| Ahh....Thanks for the reply my friend.....Yes!i have all set and done on the Logic side.But i need to know if i have 2 configure anything differently on the MIDIoverLAN CP for it to transmit 16 channels.Should i enter a diiferent ip address or somthing different?????What r the MIDIoverLAN CP settings for multi channels.Pls advice......Regards. |
|
| Back to top |
|
|
Inteleky
Joined: 08 Jul 2005
Posts: 20
|
|
Posted: Mon Oct 03, 2005 10:28 am Post subject:
|
|
|
As long as you activate each port that you need to have logic send midi through you will be fine. Each channel of each port uses the ip address that you assign the port. Make sure you have the correct ip addresses.
If you are using windows, you need to make sure your firewall is not blocking midioverlan. If it is, look in the manual for instructions.
Sorry I could not be of more assitstance. |
|
| Back to top |
|
|
heigamper
Joined: 24 Nov 2008
Posts: 2
|
|
Posted: Mon Nov 24, 2008 3:10 pm Post subject: Midi over Lan 16 Midi - Channels request on one port
|
|
|
Hello Inteleky
Thanks for your writing "Midi Over Lan! 16 Midi Channels.
Is It possible to play "Multimode" with Cubase SX 3 (Windows XP) using 16 different midi Channels (usig the PC with Cubase SX3 as Target PC), Midi over Lan is on the Mac Book pro with Logic Pro 8.
Thanks.
heigamper |
|
| Back to top |
|
|
|
|
