|
View previous topic :: View next topic
|
| Author |
Message |
Guest
|
 Posted: Fri Mar 11, 2005 1:39 pm Post subject: missing one port in 2.2
|
 |
|
Everything is working fine here except port one is not receiveing midi. all other 15 ports work correctly.
Logic 7.01 into GS3 is where the problem occurs. All settings are identical to the working ports except of course the recognize port number. |
|
| Back to top |
|
|
Guest
|
|
Posted: Fri Mar 11, 2005 2:01 pm Post subject: Re: missing one port in 2.2
|
|
|
| Anonymous wrote: | Everything is working fine here except port one is not receiveing midi. all other 15 ports work correctly.
Logic 7.01 into GS3 is where the problem occurs. All settings are identical to the working ports except of course the recognize port number. |
btw my contact info is
craig@scoredog.tv |
|
| Back to top |
|
|
MOL_Moderator
Joined: 20 Jun 2003
Posts: 103
|
|
Posted: Mon Mar 14, 2005 9:32 am Post subject: Re: missing one port in 2.2
|
|
|
| Anonymous wrote: | | ... Logic 7.01 into GS3 is where the problem occurs. All settings are identical to the working ports except of course the recognize port number. |
What do MolCp MIDI monitors show regarding NetPort 1 on both sides?
(I'd get some detailed info). |
|
| Back to top |
|
|
Guest
|
|
Posted: Mon Mar 14, 2005 11:54 am Post subject:
|
|
|
On the Mac leaving...it shows nothing on all ports...to the pc, the monitor shows all ports working coming in except port 1.
thanks
Craig |
|
| Back to top |
|
|
MOL_Moderator
Joined: 20 Jun 2003
Posts: 103
|
|
Posted: Tue Mar 15, 2005 9:41 am Post subject:
|
|
|
| Anonymous wrote: | On the Mac leaving...it shows nothing on all ports...to the pc, the monitor shows all ports working coming in except port 1.
|
You want to say Mac side MIDI monitor's leds don't blink while playing back? Does Mac side MIDI monitor invoke automatically? Actually MIDI
monitor (Mac platform) doesn't reflect MIDI stream activity only when it was invoked manually after the driver has become active. |
|
| Back to top |
|
|
Guest
|
|
Posted: Tue Mar 22, 2005 12:20 pm Post subject:
|
|
|
| I get nothing from the Mac monitor, but midi is being delieverd to ports 2-16. |
|
| Back to top |
|
|
Guest
|
|
Posted: Mon Mar 28, 2005 8:59 pm Post subject:
|
|
|
nothing else?
btw the port does not work in Vstack either |
|
| Back to top |
|
|
Guest
|
|
Posted: Wed Apr 06, 2005 10:02 pm Post subject:
|
|
|
Alexander,
You are not too quick with replies and it seems you do not have any answers to my problem.
Craig |
|
| Back to top |
|
|
MOL_Moderator
Joined: 20 Jun 2003
Posts: 103
|
|
Posted: Fri Apr 08, 2005 7:19 am Post subject:
|
|
|
| Anonymous wrote: | | ... You are not too quick with replies and it seems you do not have any answers to my problem... |
Firstly the forum is not the only my workplace, secondly some questions take some excusive time to give certain response.
I've investigated a possibility of your issue... Could you please check NetPort 1 settings on both sides once again and/or send email MolCp control panel screenshots attached to our supportbox with the same subject. |
|
| Back to top |
|
|
|
|
